Last updated: 4 October 2026
Decograde Concrete Resurfacing sprays concrete finishes in Bankstown. A cement-based coat goes over a prepared slab, is textured and sealed, and suits paths, courtyards and entries that are solid but dull. Call (02) 9090 4131 to talk it through.
Why spray-on suits a Bankstown courtyard
Compact courtyards, side paths and entries suit a thin, easily masked finish. Spray-on keeps existing levels and edges, and it can be applied around fixtures and walls without lifting anything.
Colour and texture
One colour is the baseline. A border, a second tone or a stencil adds hours and cost. We bring sample boards, and we suggest you look at them outside in your own light before you choose.
Still weighing your options? Call (02) 9090 4131 for a straight answer.
Why preparation shows through
Spray-on is thin and copies what is under it, so cracks, stains and loose patches show unless they are repaired. We clean, strip, repair and etch before spraying, which is the part that decides how long it lasts.
Choosing between plain and patterned? Describe the area. Call (02) 9090 4131.
Steps, edges and corners
Flat open areas go quickly. Steps, edges and tight corners take longer and are measured separately. Tape lines are lifted by hand to keep edges crisp.
Sealer and upkeep
Sealer protects against stain and UV and makes the surface easier to wash. We name it in the estimate and tell you how long to wait before foot traffic and furniture. Sweep regularly, wash with water and a mild cleaner, and avoid harsh chemicals.
Questions to ask before you book
- How many coats, and which sealer?
- What preparation is included?
- When can I walk on it?
- Is the colour I saw a sample or a finished job?
See the spray-on resurfacing page and the spray-on cost guide.
Ready for a practical answer? Call (02) 9090 4131 to discuss your project.
Spray-on beside other options
Spray-on suits slabs that are solid and need a fresh face. It is a lower-cost route than a thicker pebble or aggregate finish and it allows more colour and pattern choice. It is not the answer for a crumbling surface or a moving slab, and we say so if yours is one of those.
Keeping spray-on clean and sealed
Wash with water and a mild cleaner, sweep leaf litter and avoid harsh chemicals and pressure washing close to the surface. A fresh coat of sealer is likely to be needed in time, and we tell you what to expect so you can plan for it.
Questions about your specific surface or budget? Call (02) 9090 4131 — no obligation.
What a spray-on job costs you in time
A small path or entry can be done in a day or two, with cure time on top. Larger areas take longer, and patterns add hours. We give you a schedule with the estimate, and we tell you when the surface can take foot traffic and furniture so you can plan around it.
Small courtyards and side paths mean an extra stencil or border adds only a modest amount to the estimate. We tell you the difference in writing so you can choose with the numbers in front of you.
Answers to common questions
Can spray-on go over an old painted path?
Not directly. Paint must come off first, because a new layer will not bond to it. We tell you how much of your path is painted when we quote.
Will it be slippery when wet?
We give the surface a texture and seal it. Tell us if the path is steep or shaded, and we adjust the texture.
How do I pick a colour?
Look at samples outside in daylight and next to your house. Mid-tones hide dirt best, and we help you narrow the choice.
What if it rains on the job day?
We do not spray in the wet. We reschedule to a dry day and tell you how it affects the timing.
Can I walk on spray-on the same day?
Not usually. The product sets the foot-traffic time, and we give it to you in writing. Vehicles and furniture wait longer, so plan for that.
Get a spray-on estimate in Bankstown
Send the area, the colour idea and a photo of the slab. We will give you a written estimate.