Last updated: 4 October 2026
A driveway takes more punishment than any other slab at the house. Decograde Concrete Resurfacing resurfaces driveways in Panania and across Canterbury-Bankstown, giving worn, stained or cracked concrete a new finish without breaking it out. Phone (02) 9090 4131 to talk it through.
What’s Included
- Inspection of the whole driveway, including the apron and any slope.
- Pressure cleaning and removal of oil, tyre marks and old sealer.
- Grinding or acid etching so the new layer bonds.
- Crack and chip repair.
- A resurfacing layer with a broom or fine texture for grip.
- Sealer, and a clear note of when the driveway can take a car.
Driveway resurfacing options for tired concrete
Most driveways here choose between three finishes: a plain spray-on coat in one colour, a decorative stencilled pattern, or a pebble-mix surface for a stone look. Each has different grip, different upkeep and a different price. Resurfacing concrete driveway options are easier to compare once we have seen the slab.
Start with the damage. The finish comes second.
Ready for a practical answer? Call (02) 9090 4131 to discuss your project.
Resurfacing a driveway versus pouring a new one
Every resurfacing job starts the same way but does not end the same way. Three real approaches, compared on the factors that decide whether the result lasts.
| DIY | Unlicensed operator | Licensed & vetted contractor | |
|---|---|---|---|
| Surface preparation | Often skipped or rushed — the step most likely to be under-done without trade experience | Varies widely; prep is the easiest corner to cut and the hardest to check afterward | Assessed on site before any product is applied |
| Expected lifespan | Depends heavily on DIY prep quality; failures often trace back to prep, not the product | Depends on who you get; no consistent standard | Backed by manufacturer application specifications |
| Insurance protection | None — you carry the risk | Often none, or unclear | Ask about insurance before work begins |
| Licence accountability | Not applicable | Often unverifiable | Checked before joining our network — verify any licence yourself |
| Total cost over time | Lowest upfront, highest redo risk | Can be lowest upfront, but redo cost if prep fails | Higher upfront, priced for a result meant to last |
How We Diagnose Driveway Damage
We walk the driveway from the garage to the kerb. Cracks are measured and checked for movement. Oil patches under the car are marked, because oil in the substrate changes what will bond. We look at where water runs, since a driveway that sheds water toward the house or pools at the foot of a slope will keep failing.
A sunken or heaved section means the problem is under the slab, and resurfacing will not fix it. In that case we say so.
Questions about your specific surface or budget? Call (02) 9090 4131 — no obligation.
Our driveway process, step by step
The sequence runs from assessment and cleaning to etching, repair, application and sealing. Cure and seal times vary by product system, so we confirm the manufacturer’s schedule and tell you the day the driveway is ready for cars and the day it is not.
Send a few photos and the length of the driveway, or call (02) 9090 4131 for a free estimate.
The council strip between your kerb and your gate
The section of driveway between the kerb and your front boundary usually sits on council land. Work there can need permission. Canterbury-Bankstown Council handles crossover and footway permits, so check with the council before any work touches that strip. We keep our resurfacing to the part of the slab that is yours unless you tell us otherwise.
Sealing, traffic and keeping the finish clean
Is sealing a concrete driveway worth it? On a resurfaced driveway, yes: the sealer protects the new layer from oil, tyre marks and water. How often it needs reapplying depends on the product, so we pass on the manufacturer’s guidance.
Sweep it, hose it, and wash oil spills off quickly. Avoid harsh acid cleaners on sealed concrete.
Not sure which option fits your situation? Call (02) 9090 4131 and talk it through with a contractor.
Driveway pricing and what moves it
Driveway resurfacing in Sydney is generally $45-$125 per m², one range across finishes (Inspire Concrete, July 2026). The band is wide because the finish you choose, the area, the slope and the condition of the slab all move the figure. A larger sloped driveway with deep oil stains costs more per metre than a flat, clean one. A written estimate after a visit gives you the figure for your slab.
For the general process, Read more about concrete resurfacing, or Read more about exposed aggregate resurfacing and Read more about spray-on concrete resurfacing for the finishes.
Reading before you book a driveway job
Ready to talk through your project?
Call (02) 9090 4131Get a Free EstimateStill weighing your options? Call (02) 9090 4131 for a straight answer.
Driveway Resurfacing across the wider area
Driveways in older streets are our most common job. See Driveway resurfacing in Revesby, Bankstown and Picnic Point for the local page. Our hours are Mon–Fri 7am–5pm and Sat 8am–2pm.
Before and after the resurfacing
Quick answers
Is sealing a concrete driveway worth it?
On a resurfaced driveway it is. Sealer protects the new layer from oil, tyre marks and water. How often it is reapplied depends on the product system, so follow the manufacturer’s guidance.
Can you pebblecrete over existing concrete?
A pebble-mix finish can go over a sound slab once the surface has been prepared. Pebble-mix resurfacing needs a solid base, so a moving or sunken slab has to be dealt with first. Our exposed aggregate page covers that finish.
How long before I can drive on it?
That depends on the product system, because cure and seal times vary by manufacturer. We give you the date for foot traffic and the date for cars in the written estimate.
Do I need council approval to resurface my driveway?
Work on your own slab usually does not, but the strip between the kerb and your boundary is generally council land and can need a crossover or footway permit. Check with Canterbury-Bankstown Council first.