Last updated: 4 October 2026
A driveway takes tyres, heat, oil drips and rain every day, so it is usually the first slab to look tired. Decograde Concrete Resurfacing resurfaces driveways across Canterbury-Bankstown and this guide covers what that costs.
What Sydney driveway resurfacing generally costs
$45-$125 per m²
Source: Inspire Concrete, July 2026
That is one range across finishes, as published. Where a driveway sits inside it depends on the points below.
Industry-typical range, not a quote. Your written estimate is the figure that counts.
Size and shape of the drive
A long straight drive is cheaper per square metre than a short, curved one with a turning bay. Edges and curves take more masking. Cutting in around garage doors and gates takes more time again.
Ready for a practical answer? Call (02) 9090 4131 to discuss your project.
Oil stains and old sealer
Oil is the biggest hidden cost. It soaks into concrete and stops a new layer from bonding, so it has to be lifted out first. Old sealer and paint go the same way.
Cracks, falls and drainage
Hairline cracks are routine to repair. A crack that keeps opening points to ground movement, and we will say so before quoting. Water that pools at the garage door is worth fixing at the same visit.
Not sure what is wrong with yours? Send us photos of the worst patches. Call (02) 9090 4131.
Finish, colour and grip
Driveways need grip on a slope and a finish that hides tyre marks. A mid-tone textured surface tends to look clean longer than a pale smooth one. Each step up in detail moves the quote toward the upper end.
Questions about your specific surface or budget? Call (02) 9090 4131 — no obligation.
Resurfacing against replacing the driveway
| Resurface | Break out and re-pour | |
|---|---|---|
| Disruption | Days of work, and the slab stays | Demolition, removal and formwork |
| Cost | A published range per square metre, above | Usually a bigger job overall |
| Suits | A solid slab with a worn face | A slab that has sunk, heaved or keeps cracking |
What a written quote should list
- The area measured and the finish chosen.
- Cleaning, stain removal and crack repair.
- The product system and the sealer.
- How long before cars can drive on it.
See the driveway resurfacing page for our full process.
Booking a look at the drive
We visit, measure and photograph the driveway, then put the estimate in writing. You decide with the full scope in front of you.
We work across the suburbs we cover, so ask whether yours is one of them.